Yellow/Green Striped, flame retardant, polyolefin heat shrink tubing.
Flexible, single thin wall, 2:1 ratio, low shrinkage temperature.
Typical Applications
For ground identification in electrical, industrial and commercial applications. General insulation, mechanical protection and identification of wire, cables and harnesses.
Standard Colours
Yellow/Green Striped. For general coloured heat shrink refer to FiniTUBE C range.
Technical Features
| Shrinkage temperature | +100°C |
| Operating temperature | -55°C to +125°C |
| Shrinkage ratio | 2:1 |
| Tensile strength | 14 Mpa |
| Dielectric strength | 20 kV/mm |
| Standards | UL224 VW-1 125ºC 600V |
Packaging
Bulk spools. Cut lengths and customised packaging available on request.
Also in standard MiniSPOOL mini dispenser boxes and MiniPACK cut length pre-packs.
Standard Sizes and Spool Quantities
| Part Code |
SIZE Inch (nom) |
SIZE mm |
Supplied Diameter |
Shrunk Diameter (max) |
Shrunk Wall Thickness (nom) |
Quantity Bulk Spool (M) |
| CYG-1/200 | 3/64 | 1.0 | 1.2 | 0.6 | 0.40 | 200 |
| CYG-1.5/200 | 1/16 | 1.5 | 1.6 | 0.8 | 0.43 | 200 |
| CYG-2/200 | 3/32 | 2.0 | 2.0 | 1.0 | 0.44 | 200 |
| CYG-3/200 | 1/8 | 3.0 | 3.0 | 1.5 | 0.44 | 200 |
| CYG-5/100 | 3/16 | 5.0 | 5.0 | 2.5 | 0.50 | 100 |
| CYG-6/100 | 1/4 | 6.0 | 6.0 | 3.0 | 0.50 | 100 |
| CYG-10/100 | 3/8 | 10.0 | 10.0 | 5.0 | 0.56 | 100 |
| CYG-13/50 | 1/2 | 13.0 | 13.0 | 6.5 | 0.56 | 50 |
| CYG-20/50 | 3/4 | 20.0 | 20.0 | 10.0 | 0.89 | 50 |
| CYG-25/50 | 1 | 25.0 | 25.0 | 12.5 | 0.89 | 50 |
| CYG-40/50 | 1-1/2 | 40.0 | 40.0 | 20.0 | 1.10 | 50 |
| CYG-50/50 | 2 | 50.0 | 50.0 | 25.0 | 1.20 | 50 |
| Customers should test the suitability of the
products for their particular application. Select the largest size that will shrink down over the component to be covered. Full details of test methods, values and full technical data sheets are available upon request. All information is believed to be correct at time of publication and we reserve the right to make changes without prior notice. Other sizes are available on request. All dimensions in millimetres unless stated otherwise. |
||||||
