Ultra Thin Wall flame retardant polyolefin heat shrink tubing.
Flexible, single thin wall, 2:1 shrink ratio, low shrinkage temperature.
Typical Applications
High quality, cost-effective commercial grade for electrical and electronic markets.
Extra thin wall enables rapid shrinking, reducing installation time and risk of damage to temperature sensitive components.
It also provides space saving in applications of high density wiring, small connector assemblies and electronic components.
Used for general insulation and mechanical protection.
Standard Colour Black
Other colours available on request.
Technical Features
| Minimum shrinkage temperature | +70°C |
| Full recovery temperature | +100°C |
| Operating temperature | -55°C to +125°C |
| Shrinkage ratio | 2:1 |
| Tensile strength | >14 Mpa |
| Dielectric strength | >20 kV/mm |
| Standard | UL 224 125ºC VW-1 300V |
Packaging
Bulk spools. Cut lengths and customised packaging is available on request.
Standard Sizes and Spool Quantities
| Part Code |
SIZE Inch (nom) |
SIZE mm |
Supplied Diameter (min) |
Shrunk Diameter (max) |
Shrunk Wall Thickness (nom) |
Quantity Bulk Spool (M) |
| CTW-1-BLK/200 | 3/64 | 1.0 | 1.20 | 0.50 | 0.20 | 200 |
| CTW-1.5-BLK/200 | 1/16 | 1.5 | 1.70 | 0.75 | 0.20 | 200 |
| CTW-2.5-BLK/200 | 3/32 | 2.5 | 2.80 | 1.25 | 0.25 | 200 |
| CTW-3-BLK/200 | 1/8 | 3.0 | 3.20 | 1.50 | 0.25 | 200 |
| CTW-5-BLK/100 | 3/16 | 5.0 | 5.20 | 2.50 | 0.28 | 100 |
| CTW-6-BLK/100 | 1/4 | 6.0 | 6.10 | 3.00 | 0.28 | 100 |
| CTW-10-BLK/100 | 3/8 | 10.0 | 10.1 | 5.00 | 0.28 | 100 |
| CTW-13-BLK/50 | 1/2 | 13.0 | 13.1 | 6.40 | 0.28 | 50 |
| Customers should test the suitability of
the products for their particular application. Select the largest size that will shrink down over the component to be covered. Full details of test methods, values and full technical data sheets are available upon request. All information is believed to be correct at time of publication and we reserve the right to make changes without prior notice. Other sizes are available on request. All dimensions in millimetres unless stated otherwise. |
||||||
