MIL Specification flame retardant polyolefin heat shrink tubing.
Flexible, single thin wall, 2:1 ratio. MIL and UL specification.
Typical Applications
Outstanding physical, chemical and electrical properties make it widely used in military, aerospace, electronics and commercial applications. General insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors, terminations and splices, and electronic components.
Standard Colours
Black, Red, Blue, Yellow, Green, White.
Clear (non-flame retardant) and other colours also available to order.
Technical Features
| Minimum shrinkage temperature | +70°C |
| Full recovery temperature | +100°C |
| Operating temperature | -55°C to +135°C |
| Shrinkage ratio | 2:1 |
| Tensile strength | 14 Mpa |
| Dielectric strength | 20 kV/mm |
| Flammability (VW-1) | Pass |
| Standards/Approvals | MIL SAE-AMS-DTL-23053/5, UL 224 125°C 600V |
Packaging
Bulk spools. Cut lengths and customised packaging available on request.
Standard Sizes and Spool Quantities
| Part Code |
SIZE Inch (nom) |
SIZE mm |
Supplied Diameter (min) |
Shrunk Diameter (max) |
Shrunk Wall Thickness (nom) |
Quantity Bulk Spool (M) |
| CM-1.2-*/200 | 3/64 | 1.2 | 1.40 | 0.60 | 0.40 | 200 |
| CM-1.6-*/200 | 1/16 | 1.6 | 1.80 | 0.80 | 0.43 | 200 |
| CM-2.4-*/200 | 3/32 | 2.4 | 2.90 | 1.20 | 0.51 | 200 |
| CM-3.2-*/200 | 1/8 | 3.2 | 3.40 | 1.60 | 0.51 | 200 |
| CM-4.8-*/100 | 3/16 | 4.8 | 4.90 | 2.40 | 0.51 | 100 |
| CM-6.4-*/100 | 1/4 | 6.4 | 6.50 | 3.20 | 0.64 | 100 |
| CM-9.5-*/100 | 3/8 | 9.5 | 10.3 | 4.80 | 0.64 | 100 |
| CM-12.7-*/50 | 1/2 | 12.7 | 13.3 | 6.40 | 0.64 | 50 |
| CM-16-*/50 | 5/8 | 16.0 | 16.3 | 8.00 | 0.76 | 50 |
| CM-19.1-*/50 | 3/4 | 19.1 | 20.1 | 9.50 | 0.76 | 50 |
| CM-25.4-*/50 | 1 | 25.4 | 26.1 | 12.7 | 0.89 | 50 |
| CM-31.8-*/50 | 1-1/4 | 31.8 | 32.8 | 15.9 | 1.02 | 50 |
| CM-38.1-*/50 | 1-1/2 | 38.1 | 40.2 | 19.1 | 1.02 | 50 |
| CM-50.8-*/50 | 2 | 50.8 | 51.0 | 25.4 | 1.14 | 50 |
| CM-76.2-*/30 | 3 | 76.2 | 81.0 | 38.1 | 1.27 | 30 |
| CM-102-*/30 | 4 | 101.6 | 103.0 | 50.8 | 1.40 | 30 |
| Customers should test the suitability
of the products for their particular application. Select the largest size that will shrink down over the component to be covered. Full details of test methods, values and full technical data sheets are available upon request. All information is believed to be correct at time of publication and we reserve the right to make changes without prior notice. All dimensions in millimetres unless stated otherwise. |
||||||
| * denotes colour: BLK=Black, RED=Red,
YEL=Yellow, BLU=Blue, WHT=White, GRN=Green. To order specify part code, size and colour (eg: CM-6.4-BLK/100) |
