General Purpose Clear non-flame retardant polyolefin heat shrink tubing.
Flexible, single thin wall, 2:1 ratio, low shrinkage temperature.
Typical Applications
High quality, cost-effective commercial grade for general applications when flame retardant properties are not required but electrical insulation and mechanical performance is important. General insulation, mechanical protection and high clarity covering for automotive, electrical and commercial applications. Ideal for protecting marked and labelled surfaces. Less longitudinal shrinkage than PVC-based tubing.
Standard Colour
Clear. For coloured heat shrink refer to FiniTUBE C range.
Technical Features
| Minimum shrinkage temperature | +80°C |
| Full recovery temperature | +100°C |
| Operating temperature | -55°C to +105°C |
| Shrinkage ratio | 2:1 |
| Tensile strength | >10.4 Mpa |
| Dielectric strength | >25 kV/mm |
Packaging
Bulk spools. Cut lengths and customised packaging available on request.
Also in standard MiniSPOOL mini dispenser boxes and MiniPACK cut length pre-packs.
Standard Sizes and Spool Quantities
| Part Code |
SIZE Inch (nom) |
SIZE mm |
Supplied Diameter (min) |
Shrunk Diameter (max) |
Shrunk Wall Thickness (nom) |
Quantity Bulk Spool (M) |
| CLR-1/200 | 3/64 | 1.0 | 1.30 | 0.50 | 0.33 | 200 |
| CLR-1.5/200 | 1/16 | 1.5 | 1.80 | 0.75 | 0.33 | 200 |
| CLR-2.5/200 | 3/32 | 2.5 | 2.90 | 1.25 | 0.44 | 200 |
| CLR-3/200 | 1/8 | 3.0 | 3.40 | 1.50 | 0.44 | 200 |
| CLR-5/100 | 3/16 | 5.0 | 5.30 | 2.50 | 0.50 | 100 |
| CLR-6/100 | 1/4 | 6.0 | 6.50 | 3.00 | 0.50 | 100 |
| CLR-10/100 | 3/8 | 10.0 | 10.3 | 5.00 | 0.56 | 100 |
| CLR-13/50 | 1/2 | 13.0 | 13.3 | 6.50 | 0.69 | 50 |
| CLR-20/50 | 3/4 | 20.0 | 20.9 | 10.00 | 0.89 | 50 |
| CLR-25/50 | 1 | 25.0 | 25.7 | 12.00 | 0.89 | 50 |
| CLR-40/50 | 1-1/2 | 40.0 | 41.2 | 20.00 | 1.10 | 50 |
| CLR-50/50 | 2 | 50.0 | 51.2 | 25.00 | 1.15 | 50 |
| CLR-80/30 | 3 | 80.0 | 81.0 | 40.00 | 1.20 | 30 |
| CLR-100/30 | 4 | 100.0 | 101.0 | 50.00 | 1.20 | 30 |
| Customers should test the suitability
of the products for their particular application. Select the largest size that will shrink down over the component to be covered. Full details of test methods, values and full technical data sheets are available upon request. All information is believed to be correct at time of publication and we reserve the right to make changes without prior notice. Other sizes available on request. All dimensions in millimetres unless stated otherwise. |
||||||
