Adhesive Lined Dual Wall 3:1 ratio polyolefin heat shrink tubing.
3:1 shrink ratio, flexible, flame retardant, with inner liner of hot melt adhesive. UL approved.
Typical Applications
The heat shrink outer sleeving and hot melt adhesive lining is designed to insulate and seal electrical and mechanical products against water and moisture. Widely used in marine, automotive and various consumer and industrial applications. For electrical wiring, terminations and mechanical components. Large 3:1 shrinkage ratio for easy installation over irregular or large components.
Standard Colour Black
Clear (non flame retardant) and Red, Blue, Yellow and White are also available on request.
Technical Features
| Minimum shrinkage temperature | +80°C |
| Full recovery temperature | +125°C |
| Operating temperature | -45°C to +125°C |
| Shrinkage ratio | 3:1 |
| Tensile strength | 10.4 Mpa min |
| Approval | UL 224 125°C VW-1 600V |
Packaging
1.2M lengths. Customised cut lengths and packaging available on request.
Note: A larger 4:1 shrink ratio range is also available. Refer to FiniTUBE CDW4X
Standard Sizes and Pack Quantities
| Part Code |
Size mm |
Supplied Diameter (min) mm |
Shrunk Diameter (max) mm |
Shrunk Wall Thickness (nom) mm |
Length M |
Pack Qty |
| CDW3X-3/1-BLK/1.2-25 | 3/1 | 3.0 | 0.6 | 1.00 | 1.2 | 25 |
| CDW3X-4.8/1.5-BLK/1.2-25 | 4.5/1.5 | 4.8 | 1.5 | 1.10 | 1.2 | 25 |
| CDW3X-6/2-BLK/1.2-25 | 6/2 | 6.0 | 2.0 | 1.20 | 1.2 | 25 |
| CDW3X-9/3-BLK/1.2-25 | 9/3 | 9.0 | 3.0 | 1.30 | 1.2 | 25 |
| CDW3X-12/4-BLK/1.2-10 | 12/4 | 12.0 | 4.0 | 1.70 | 1.2 | 10 |
| CDW3X-19/6-BLK/1.2-5 | 19/6 | 19.0 | 6.0 | 2.00 | 1.2 | 5 |
| CDW3X-24/8-BLK/1.2-5 | 24/8 | 24.0 | 8.0 | 2.20 | 1.2 | 5 |
| CDW3X-30/10-BLK/1.2-5 | 30/10 | 30.0 | 10.0 | 2.40 | 1.2 | 5 |
| CDW3X-40/13-BLK/1.2-5 | 40/13 | 40.0 | 13.0 | 2.50 | 1.2 | 5 |
| CDW3X-50/19-BLK/1.2-5 | 50/19 | 50.0 | 19.0 | 2.50 | 1.2 | 5 |
| Customers
should test the suitability of the products for their particular application. Select the largest size that will shrink down over the component to be covered. Full details of test methods, values and full technical data sheets are available upon request. All information is believed to be correct at time of publication and we reserve the right to make changes without prior notice. |
||||||
