General Purpose flame retardant polyolefin heat shrink tubing.
Flexible, single thin wall, 2:1 ratio, low shrinkage temperature. UL approved.
Typical Applications
High quality, cost-effective, commercial grade for electrical, electronic, automotive, and general industrial markets. Applications include general insulation, mechanical protection and colour identification of wire, cables and harnesses, connectors and terminals, and electrical and electronic components. High strength and resilience.
Standard Colours
Black, Red, Brown, Grey, Blue, Yellow, Green, White, Orange, Violet.
For Clear see FiniTUBE CLR range and for Yellow/Green see FiniTUBE CYG range.
Technical Features
| Minimum shrinkage temperature | +70°C |
| Full recovery temperature | +100°C |
| Operating temperature | -55°C to +125°C |
| Shrinkage ratio | 2:1 |
| Tensile strength | 14Mpa |
| Dielectric strength | 20 kV/mm |
| Flammability (VW-1) | Pass |
| Approval | UL 224 125°C 600V VW-1 |
Packaging
Standard Bulk Spools. Cut lengths and customised packaging available on request.
Also in standard MiniSPOOL mini dispenser boxes and MiniPACK cut length pre-packs.
NOTE: A 3:1 ratio range FiniSHRINK C (3X) is also available on request .
Standard Sizes and Spool Quantities
| Part Code |
SIZE Inch (nom) |
SIZE mm |
Supplied Diameter (min) |
Shrunk Diameter (max) |
Shrunk Wall Thickness (nom) |
Quantity Bulk Spool (M) |
| C-1-*/200 | 3/64 | 1.0 | 1.30 | 0.50 | 0.33 | 200 |
| C-1.5-*/200 | 1/16 | 1.5 | 1.80 | 0.75 | 0.33 | 200 |
| C-2.5-*/200 | 3/32 | 2.5 | 2.90 | 1.25 | 0.44 | 200 |
| C-3-*/200 | 1/8 | 3.0 | 3.40 | 1.50 | 0.44 | 200 |
| C-5-*/100 | 3/16 | 5.0 | 5.30 | 2.50 | 0.50 | 100 |
| C-6-*/100 | 1/4 | 6.0 | 6.50 | 3.00 | 0.56 | 100 |
| C-10-*/100 | 3/8 | 10.0 | 10.3 | 5.00 | 0.56 | 100 |
| C-13-*/50 | 1/2 | 13.0 | 13.3 | 6.50 | 0.69 | 50 |
| C-20-*/50 | 3/4 | 20.0 | 20.9 | 10.0 | 0.89 | 50 |
| C-25-*/50 | 1 | 25.0 | 25.7 | 12.5 | 0.89 | 50 |
| C-40-*/50 | 1-1/2 | 40.0 | 41.2 | 20.0 | 1.10 | 50 |
| C-50-*/50 | 2 | 50.0 | 51.2 | 25.0 | 1.15 | 50 |
| C-80-*/30 | 3 | 80.0 | 81.0 | 40.0 | 1.20 | 30 |
| C-100-*/30 | 4 | 100.0 | 101.0 | 50.0 | 1.20 | 30 |
| Customers should test the suitability of the products for their
particular application. Select the largest size that will shrink down over the component to be covered. Full details of test methods, values and full technical data sheets are available upon request. All information is believed to be correct at time of publication and we reserve the right to make changes without prior notice. Other sizes available on request. All dimensions in millimetres unless stated otherwise. |
||||||
| * denotes colour: BLK=Black, RED=Red, BLU=Blue, BRN=Brown,
GRY=Grey YEL=Yellow, GRN=Green, WHT=White, ORG=Orange, VLT=Violet. To order specify part code, size and colour (eg: C-10-BLK/100) |
